Hoe Do I Change Upload Size in Ispconfig 3

Contents Side by side

General

1 What is ISPConfig?

ISPConfig is a software package that permits the piece of cake management of servers, webspace, resellers and single virtual hosts.

ISPConfig consists of 3 levels:

ISPConfig for server administrators allows the direction of servers, webspace, resellers and customers.
ISPConfig for resellers allows the management of webspace, customers and virtual hosts (sites).
ISPConfig for webmasters allows the management of sites, co-domains and mailboxes.

ii Terms and construction of the transmission

According to the 3 levels the manual is split into iii sections:

I Administrator Manual describes the services available for server administrators .
Ii Reseller Manual describes the services available for resellers.
Iii Customer Manual describes the services available for customers.

Please notation: This structure does not mean that each section is independent from each other. Level I contains levels II and Three and level Two contains level Iii.
For a improve overview the manuals I and 2 include links to the applications that are available in the respective sub-levels and that are described there.

3 Installation/Upgrade/Deinstallation

iii.1 Installation

In order to install ISPConfig please read the installation manual.

The installation manual is available in the post-obit formats: HTML.

3.two Upgrade

You tin can update the ISPConfig arrangement from one version to some other if these versions belong to the aforementioned principal version (eastward.grand. i.ten; i.e., you can update from version 1.1.12 to version 1.ii.0). Please download your wanted ISPConfig version to your server and proceed as if it was a new installation, not an update. The installation routine will notice that there is already a ISPConfig system on the server and volition execute the necessary steps for the upgrade.

iii.three Deinstallation

If you lot desire to deinstall the ISPConfig system please login to the server equally root on the command line and execute the following command:

/root/ispconfig/uninstall

The uninstaller gives you the following options to select from:

Partial Deinstallation: Just the ISPConfig system itself volition be uninstalled, but non the webs, users, DNS records etc. created by it.
Complete Deinstallation: The ISPConfig arrangement and also the objects created past information technology (webs, users, DNS records, etc.) will exist uninstalled.

4 Login and Logout

Logging into the ISPConfig system is described in the respective manuals (chapter 1.1 in the manuals I - Three).

To log out, click on "Logout"in the carte.

I Administrator Manual

1 General

i.ane Login and Password

Please get to the URL of your ISPConfig organization (e.g. https://world wide web.domain.tld:81 or http://www.domain.tld:81; supplant "www.domain.tld" appropriately) with your Browser and enter your user name and your password into the form "Login". Confirm past clicking on "Login".

ane.2 ISPConfig Interface for Server Administrators

The administrator's interface consists of the post-obit sections:

Menu with the areas "Management", "Internet access provider Director", "DNS Director", "Web-FTP", "ISP Invoice", "Tools", "Help" and "Logout".
Buttons: Straight below the carte du jour there are buttons for deportment similar �New reseller�, �New customer�, etc. What buttons are shown depends on the department yous are in, e.yard. �ISP Managing director� or �DNS Manager�. The sections �Management� and �Logout� do not have buttons.
Structure tree / storage system: The structure tree is the storage organization of the ISPConfig director. Depending on the chosen card the following items are shown: server data, resellers, customers, sites, users (ISP Managing director) and the DNS service (DNS Director).

Information field "Server Status": The data field "Server Status" is visible in the middle of the screen subsequently logging in. It shows the hardware status of your processor(southward), the usage of the server's drives and partitions, RAM and the condition of the server services (e.g. Apache spider web server) (see chapter I-ii.2).

1.3 ISPConfig Privileges for Server Administrators

The privileges of a ISPConfig administrator include those of a reseller and a customer, i.e. as ambassador y'all can execute actions belonging to a reseller or customer without having to login again.

Privileges of a ISPConfig administrator

Change server properties
Create and administrate resellers, read their statistics
Create backups of the ISPConfig database
Edit DNS entries

Privileges of a reseller

Create and administer customers, read their statistics
Create and administrate webs
Create DNS entries

Privileges of a customer

Read a web'south bones data and statistics
Create and administrate users and email boxes
Create and administrate (sub)domains
Apply for SSL certificates (optional)
Administrate MySQL access information

Privileges of a user

Change the settings of his mailbox (countersign, spamfilter and antivirus settings)

1.4 Saving

The ISPConfig organization offers you 2 possibilities to save data you enter into a form:

"Salve"-Button: Click onto the "Save"-push button to save your entries. The information volition exist submitted, and the structure tree too as the start page will be reloaded in your browser.
Change the tab: If a form consists of more than one tab you can simply modify the tab to save your data. The data of the old tab will be saved, and the new tab will be loaded, whereas the structure tree volition not exist reloaded. This technique of saving information allows you lot to process forms with more than one tab in one laissez passer and is one of the main characteristics of ISPConfig.

one.5 Changing the ISPConfig Password

You can edit your ISPConfig password under "Tools" -> "Change Password".

Please enter your current and your new password (2x) into the grade "Change Countersign" and click on "Save".

i.half dozen Language Settings

Yous tin can set the language of your ISPConfig system under "Tools" -> "Change Language" .

In the form "Change Language" select the linguistic communication the system should use for you lot and click on "Save".

Please annotation: The language setting only affects your own account. Other users of the ISPConfig system (such as resellers or customers) tin can select their linguistic communication individually.

1.7 Display of Passwords in the ISPConfig System

Passwords that y'all entered in the ISPConfig organization (eastward.m. reseller or client passwords for accessing the ISPConfig system; passwords for customers' MySQL databases) will not be displayed in the ISPConfig organisation for security reasons after they were saved! Thus, an empty password field in a ISPConfig form does not mean that no countersign was entered before.

An existing password does non go displayed after the reload of the respective form.

1.eight Help

Click onto the menu item "Help".

Hither you volition find the administrator-, reseller- and customer-manual in English and German in PDF format likewise every bit links to the knowledgebase on the Projektfarm website.

In add-on to that you tin find a question marking side by side to many input fields in the ISPConfig organization:

If you lot click on the question mark a small pop-up window with context-sensitive assist will open.

2 Full general Settings

ii.1 Server Settings (Software)

Depending on your server some settings are done automatically at installation time of ISPConfig. Further settings have to be washed manually:

To view the general settings or make changes, click on the card "Direction", open up the folder "Server" and click on the certificate "Settings".

Server Name: The default value is �Server 1�. This tin be changed to whatever value you want.
Hostname: The default value is �www�.
Domain: The domain under which the ISPConfig organization tin can be reached.
IP Accost: Enter your IP address hither.
Netmask: Enter the netmask of your server.
Admin Email: The email address of the person that should get a message from the ISPConfig system if one of the services on the server (e.g. web server) fails.
IP Listing: If your server has more than IP address (the one entered in the field "IP Address") enter the boosted IP addresses hither (one per line). Of import: The network volition exist configured according to the data in "IP Accost" and "IP Listing" (this feature is bachelor nether Linux only)! Exercise non enter nonsensical information as this could lead to your server not being accessible from the outside!
Site: The virtual site's backdrop are fix to default values.
FTP: The FTP backdrop are ready to default values. Actuate "Save Log" if the FTP log file should be saved after the nightly traffic analysis. The log file will then be saved with the extension ".ispconfigsave" in the same directory. Otherwise it will be deleted!
Electronic mail: The email properties are set to default values. For the electronic mail traffic to exist analyzed correctly please cheque if the path and name of the email log file is right. Actuate "Relieve Log" if the electronic mail log file should be saved later on the nightly traffic assay. The log file will and then be saved with the extension ".ispconfigsave" in the same directory. Otherwise information technology will exist deleted!

If yous desire to apply mailboxes in the Maildir format (in contrast to the traditional Unix-Mailbox format), actuate "Maildir". Attention: If you do this during normal performance it is possible that emails that take not been fetched from the server nevertheless cannot be accessed anymore (only afterwards the previous value of "Maildir" has been re-established). Information technology is best to alter this value when there are no users on the organisation or when you are sure that there are no emails in users' inboxes at the time of the change.
Specify the email address under "Antivirus-Admin" to which notifications about identified viruses in emails should be sent.
Activate "Spamfilter", if you desire to make bachelor the spamfilter to the users on your server.
DNS: The DNS properties are set to default values. Delight enter the two DNS servers and the email address that will be written to the DNS records generated by the Internet access provider-Manager and the DNS-Manager. If yous mark "Default MX" each zone (in this example "domain.tld") created past the DNS-Managing director will get an A record of the grade post A 192.168.0.100
as well equally an MX record of the grade

MX 10 mail.domain.tld.

automatically. "192.168.0.100" volition be replaced by the respective IP address.
Functions: If Frontpage Extensions are installed on the server y'all can activate them here for the ISPConfig system. If you lot do so and a new spider web is created, Frontpage can be added to that spider web as a feature. If y'all do not actuate Frontpage Extensions hither or if the ISPConfig system cannot notice the Frontpage executable Frontpage cannot exist added to a spider web as characteristic.
Please annotation: Currently only Frontpage 2002 under Apache one.3.x is supported!
Other: Hither y'all tin can specify the User-ID and Grouping-ID from which on the ISPConfig arrangement creates users and groups. You should choose values that practice not disharmonize with existing User-IDs and Goup-IDs. In addition to that y'all should not change these values in a ISPConfig system which already is at work! Furthermore you can specify salutatory emails for customers and resellers as well as enter HTML code for your own standard index pages that will exist created when a new site is created. Please note that salutatory emails will simply exist sent if the field "Email" in the customer'southward/reseller'south master data contains a valid electronic mail accost.

2.ii Server Status (Hardware and Statistics)

The hardware data of your server is loaded into the ISPConfig organization at installation fourth dimension. In addition to the hardware data the ISPConfig organisation gives some information well-nigh the status and usage of the server. This information is visible in 2 places:

In the information field "Server Status" that appears upon login or past clicking on "Internet service provider Manager". Information technology is also visible under "Management" in the folder "Server". In that location you need to click on "Status".

The post-obit information is available:

Server Online since: Shows how long the server has been online.
Users Online: Shows how many users are currently logged into the server.
CPU Usage: Shows the boilerplate usage of the processor in the last one, 5 and 15 minutes.
Drive/File Usage: Shows the total size, the used and unused part, the usage in percent too as the name of the drive.
RAM: Shows the free RAM in KB.
CPU: Shows the hardware information of the server'due south processor.
Services: Shows the status of the following services: HTTP server (Apache), FTP server, SMTP server, BIND server and MySQL server.

ii.iii Database Fill-in

The data of all resellers, customers, sites, domains, users and email addresses is saved in the ISPConfig database. Thus it is highly recommended to make a database backup at regular intervals, to check, to optimize and - if necessary - to repair the database.

This is how you lot tin access the database functions:

Click on the carte du jour "Management".

In the structure tree click on "ISPConfig database".

Backup Data: A backup of the ISPConfig database is created.
Check Database: By clicking on "Check Database" you receive a listing of all database tables with their status, i.due east. "OK" or "damaged".
Optimize Database: By clicking on "Optimize Database" you tin can optimize the tables in the ISPConfig database. As a result you go a listing of all tables with the condition "OK" if the optimization has taken place or with the status "Table is already up to date", if optimization is not necessary.
Repair Database: By clicking on "Repair Database" damaged tables in the ISPConfig database are repaired. This is indicated by the status "OK".

2.4 Services (Monitoring and Firewall)

The ISPConfig system allows you to start/finish/restart services, to monitor services (if a monitored service fails a warning email will exist sent to the administrator; meet chapter I-2.i, "Admin Email") and to setup a firewall (in case either iptables or ipchains is available on your organisation).

Click on "Management" -> "Server" -> "Services". The form "Internet service provider Services" will be opened with the tabs "Services", "Monitoring" and "Firewall".

ii.four.1 Start/Stop/Restart Services

In the tab "Services" you can encounter the status of some important services on the server (online/offline), and you have the possibility to start/finish/restart services. Delight confirm your changes by clicking on the "Save" button or by going to another tab (run across chapter I-1.4 "Saving").

2.4.two Monitor Services

Nether "Monitoring" you lot tin can specify services that are to be monitored by the ISPConfig organization. The default setting is to monitor the services "Web Server", "FTP Server" and "MySQL Server". The monitoring takes place once every thirty minutes. If a service fails, an email will exist sent to the ambassador (meet chapter I-ii.1, "Admin E-mail").

Please notation: If your mail server fails, no warning e-mail can be sent to the ambassador!

This is how y'all setup the monitoring of further services:

Click on the button "Add".

The form "ISP Monitor" is loaded.

Please enter the following information:

Service: Please select the advisable service. Yous accept the choice betwixt "Webserver", "Bind DNS", "Mailserver", "FTP Server", "POP3 Server" and "Other". Your pick is important for the way the service will be checked for availability. Example: If you select "Webserver" the system checks if a service of the type "tcp" is running on the port specified by you. Yous tin choose between "tcp" and "udp" under "Type" only if you select "Other".

The post-obit allocation "Service" <-> "Blazon" exists:

Service	Way of Monitoring
Webserver	tcp
Bind DNS	tcp
Mailserver	tcp
FTP Server	tcp
POP3 Server	tcp
Other	Can be selected nether "Blazon".

Monitoring: Yes or No.
Hostname: The host on which the service should be monitored, normally "localhost".

Port: The port on which the monitoring should accept identify. Y'all have to specify a port considering it could be that you have your services configured on other ports than the default ones.

Listing of Standard Ports:

Service	Standard Port
Webserver	80
Demark DNS	53
Mailserver	25
FTP Server	21
POP3 Server	110

Type: Please select the type of monitoring ("tcp" or "udp"). This is of importance but if you have selected "Other" under "Service".

Then click on "Relieve", or change the tab.

In the tab "Actions" you lot tin enter a vanquish command which volition be executed if the respective service is offline (e.yard. a command to restart the service):

Later on the information has been saved the services which are to be monitored are listed in the form "Internet access provider Services" in the tab "Monitoring" and can exist edited there.

2.iv.iii Firewall

In the tab "Firewall" you lot can add new firewall rules or edit existing ones. The firewall can only be active if you have started it in the tab "Services". By default the firewall is inactive.

There are some firewall rules implemented in the ISPConfig system past default:

There are 2 possible weather:

A port (and thus the service running on it) can be reached from the outside and is non blocked by the firewall: "aye" is shown in the column "Active".
A port cannot exist reached from the exterior considering it is blocked by the firewall: This is the case for all ports where "no" is in the column "Active" and besides for all ports non listed hither at all!

Existing rules can be edited by clicking on the name of the dominion; the push button "Add together" lets yous add together new rules.

The post-obit information is necessary:

Name: The name of the rule. For instance, if you create a rule for the DNS server you tin can proper name the rule "DNS" in order to be able to allocate it afterwards.
Active: "Yes" makes the port being reachable from the outside, "No" blocks it.
Type: The type of the port, "tcp" or "udp".
Port: Delight enter the port (as number) for which the rule should be valid.

Please note: In club to prevent that the server cannot be reached from the exterior at all (non even by the administrator) the ISPConfig arrangement lets y'all block all ports except port 22 (SSH) and port 81 (the ISPConfig organisation)! If yous endeavor to block these ports, this will exist ignored by the ISPConfig system!

two.5 Update Director

You can reach the Update Managing director under "Management" -> "Update Manager" -> "Update". It is a comfortable interface to install ISPConfig updates or tools provided by Projektfarm GmbH such as webmail, phpMyAdmin or a portscanner.

At that place are two ways to install updates:

You download the update from the Projektfarm website to your local hard disk drive. So you mark "Upload", insert the update with the "Browse" button into the field "File" and click on "Start Installation". The field "URL" will and then be ignored.
Yous install the update direct from the Projektfarm website. In gild to practise and so mark "URL" and insert the URL of the update in the field "URL". Then click on "Start Installation".

If Projektfarm GmbH provides an MD5 for the update you can copy it into the field "MD5". The ISPConfig system will and then compare the "real" MD5 (which the organisation calculates from the update) with the MD5 you lot have inserted and thus check the integrity of the update. If the MD5s differ the update will not be installed.

3 Resellers

You can manage resellers via the structure tree. Each reseller is shown twice in the structure tree:

Reseller Management:
In the folder "Reseller" you tin can find the primary information, the limits and access data of all resellers. This folder is visible merely to the ambassador. Learn how to add a new reseller in chapter I-3.1.
Reseller interface:
In add-on to the reseller management every reseller is shown as a group of their own with the sub-folders "Clients" and "Sites" in the construction tree. This display is the aforementioned every bit the interface of the corresponding reseller. Here the administrator and the corresponding reseller can carry out actions related to the reseller (e.g. add together customers, manage sites etc.).

3.i Calculation a Reseller

Adding a reseller is done in five steps.

1. Step: Open the course "ISP Reseller"

Click on the button "New reseller".

The grade "ISP Reseller" appears with the opened tab "Principal Data".

two. Step: Assign championship, binder and primary data

Title: Provide a title under which the new reseller should announced in the structure tree.
Folder: Choose the binder "Reseller". Alternatively yous have the possibility of creating a subfolder for the resellers which tin then be chosen from here. Learn how to create folders in transmission 2 in chapter iv.1.i.
Master Data: Under this section you can enter the main data of the new reseller. Some of this information is optional.
Relieve Reseller: By clicking on "Save" the new reseller is saved and appears in the construction tree under the title y'all accept provided. There you lot tin can click on the new reseller to complete the missing steps. OR: By clicking on the section "Limits" y'all can go directly to the next stride. This style the master data is saved but the structure tree is not updated. This happens by clicking on "Relieve" or past clicking on the bill of fare "Internet service provider Manager".

3. Stride: Limit webspace, sites, users and domains

Click on the tab "Limits".

Sites: The value entered here represents the number of virtual hosts (sites) available to the reseller and their customers. If the reseller tries to become beyond this limit they volition become an fault message. The default value is -1 which means "Unlimited".
User: Hither you lot can limit the number of users that the reseller and their customers can create. If the reseller tries to go beyond this limit they volition go an error bulletin. The default value is -1 which means "Unlimited".
Domains: Hither you tin can limit the number of domains that the reseller tin create. If the reseller tries to go beyond this limit they will go an fault message. The default value is -1 which ways "Unlimited".
Domain DNS: Specifies for how many webs of the reseller the "Create DNS" option in the corresponding web form is available.
HTTPD Includes: If you activate this the reseller is able to write additional Apache directives into the virtual host containers of the webs that are allocated to him (see chapter 2-three.1 "Apache Directives"). This might be a security threat.
DNS Director: If yous actuate this the reseller is allowed to use the DNS Director in lodge to create and edit his own DNS records.

four. Step: Enter access information for the reseller (username and countersign)

Click on the tab"Login Data ".

Username: The username of a reseller should be unique, i.due east. you cannot assign the same username to ii different resellers.
Countersign: Afterward you enter a password and click on "Salvage" or get to some other tab, the countersign disappears and becomes invisible.

5. Pace: Save

Click on "Save".

3.two Edit Reseller Data

Open the binder "Reseller" in the ISPConfig structure tree and click on the reseller you desire to edit so that the "ISP Reseller" form appears. Make the desired changes and click on "Save".

Modify Title: In some cases information technology might be necessary to change the title of a reseller, eastward.g. if a second reseller with the same name (such as Miller) has appeared.
Change Reseller Master Data: If the address, phone number etc. of a reseller changes, you can update the reseller in the department "Master Data" and click on "Salvage".
Change Limits of Sites, Domains and Users: Decreasing the limits for webspace, sites, domains and users of a reseller is but possible if the values of the existing sites of the given reseller are in the new range. Otherwise yous will get an mistake message. The form for editing the limits can exist found in the tab "Limits".
Modify User Proper name and Countersign: The user name of a reseller can be changed in the tab "Access Information". After clicking on "Save" the reseller can merely login with his new user proper name. As long as you do non type anything in the (empty) field "Password" the old password will all the same be effective.
Forgot your countersign? / Change countersign: A reseller's password tin can be changed in the tab "Access Information". Later clicking on "Save" the password becomes invisible.
Direction of Resellers in different Folders: Y'all can organize the resellers in different subfolders. Learn how to create subfolders in chapter II-iv.1.1. To move a reseller into another binder select the corresponding folder in the field "Folder" at the peak of the form (see chapter 2-4.1.2).
Delete Resellers: Open the form of the reseller you want to delete and click on "Delete".
Please note: A reseller can only be deleted if no customers are assigned to him. If this is non the instance you take to delete the reseller'southward customers starting time, or assign the customers to another reseller or to the administrator.

4 Service Deportment for Resellers

4.1 Customers

You can get an overview of the resellers and your own customers by viewing the construction tree:

The applications affecting customers can exist carried out past resellers in the ISPConfig reseller level. Thus they go touched simply briefly in here. Learn more about them in the Reseller Manual.

The post-obit client related deportment can be taken:

Add together a new client: Click on the button "New Customer" and follow the steps described in affiliate II-2.
Assign a customer to another reseller: Open up the certificate of the customer in the structure tree. In the field "Group" in the form "ISP Client" choose the corresponding reseller or yourself as admin. In the field "Folder" select the binder "Customers" or another folder if available. Click on "Save".
Delete a customer: Click on the customer to be deleted in the structure tree. The corresponding form opens. Click on "Delete".
Customer Statistics: Every customer has his own statistics which tin be seen in the tab "Statistics" in the customer's grade.

four.2 Manage Sites

The direction of the administrator'due south sites is done via the folder "Sites". Resellers' sites can be managed via the subfolder "Sites" in the reseller's binder.

Applications related to sites tin besides be carried out by resellers and to some extent by customers. Here is only a brief list.

Reseller Level:

Add a new site: ( meet II-3.2)
Delete a site: (see 2-3.ii)
Change limits of sites, users and domains: (see II-iii.2)
Change a site'due south boosted features: (see II-3.two)

Client Level:

Adding and managing users: (see III-ii.2)
Adding and managing co-domains: (run across Iii-2.iii)
Employ for an SSL-certificate: (see 3-2.4)
Change MySQL access data: (encounter Iii-2.five)
View site statistics: (run into III-3)

iv.3 DNS Entries

four.3.1 Create DNS Entries (meet Reseller Manual)

A DNS entry for a site or co-domain is created as follows:

1. Step: Open Site Course.

In the structure tree click on the corresponding customer, become into the register "Webs" and click on the IP address of the corresponding web.

Or:

Open the corresponding site in the construction tree.

2. Step: Open up a co-domain and activate it (optional).

Go to the tab "Co-Domains" and click on the IP address of the co-domain.

iii. Stride: Actuate DNS.

Check "Create DNS" and "Create DNS MX".

4. Footstep: Relieve.

Click on "Save".

Now the site is visible as a new entry in the "DNS Manager".

4.3.2 Secondary-DNS Entries (Slave Zone)

This is how you create a Secondary-DNS entry (Slave Zone):

1. Step: Open Slave Zone Form

Click on "New Slave".

two. Step: Create Slave Zone

Domain: Enter the domain that the Secondary-DNS entry is for.
DNS-Chief IP: Enter the IP accost of the Primary-DNS server of the domain.

3. Stride: Save

Click on "Salve".

iv.three.3 Edit DNS Entries.

You can edit DNS entries as follows:

Click on the menu "DNS Manager".

In the construction tree click on the DNS entry to be edited.

Delete DNS Entries: Open the entry and click on "Delete". The entry is now in the dustbin and can exist restored from in that location.
Search Function: Y'all tin search for whole DNS entries every bit well as A records, C-Proper noun records and MX records. Click on the button "Search", select the corresponding document. Enter your search criteria and click on "Continue". A list with matches to your search criteria is displayed. Learn more about the search function in chapter II-4.two.

5 Statistics

The ISPConfig statistics incorporate information about the usage of webspace and traffic.

5.1 Reseller Statistics

Past selecting the respective reseller in the structure tree you lot (as ISPConfig administrator) can view statistics about the traffic caused past the reseller.

In the form "Internet service provider Reseller" (in the tab "Statistics") you can find information most the web-, email- and FTP-traffic of the reseller, subdivided into the customers of the reseller.

5.2 Customer Statistics

Customer statistics can also be seen past the corresponding reseller and are described in chapter Two-5.1.

5.3 Site Statistics

Site statistics tin can also be seen past the corresponding reseller and are described in chapter II-5.2.

five.4 Webalizer Statistics

Webalizer statistics tin as well be seen past the respective reseller and are described in chapter II-5.three.

6 Web-FTP/Password Protection of Directories (.htaccess/.htpasswd)

Web-FTP is treated in chapter III-4.

vii Additional Software

The post-obit additional software is available for the ISPConfig organization:

Webmail: A browser interface for email boxes.
phpMyAdmin: A browser interface for the administration of your MySQL databases.

The software is available for free on the ISPConfig website and can exist installed via the "Update Manager" (see affiliate I-2.5). Later on the installation you lot tin find links for both applications nether "Tools".

7.1 Webmail

The application used every bit email interface is called "Uebimiau". Further information tin can be found on the website of the Uebimiau project: http://uebimiau.sourceforge.net/ .

The application can be accessed via the link under "Tools" or via the binder "webmail" which is located in the web of the ISPConfig system, thus https://world wide web.domain.tld:81/webmail/ where www.domain.tld has to exist replaced appropriately.

7.ii phpMyAdmin

Further information about phpMyAdmin can be found under http://www.phpmyadmin.net/ .

The awarding can be accessed via the link under "Tools" or via the folder "phpmyadmin" which is located in the web of the ISPConfig system, thus https://www.domain.tld:81/phpmyadmin/ where www.domain.tld has to be replaced accordingly.

Appendix

1 Start/Stop the ISPConfig System

The ISPConfig organization can exist started/stopped manually from the command line. Login to your control line every bit root and execute the following command:

/etc/rc.d/init.d/ispconfig_server first|stop|restart (RedHat and Mandrake)

/etc/init.d/ispconfig_server kickoff|cease|restart (SuSE and Debian).

2 Start/Terminate vsftpd

If you lot use vsftpd every bit FTP server on your system this service volition non exist run by inetd/xinetd subsequently the installation of the ISPConfig system only past the ispconfig_tcpserver which comes with the ISPConfig system. This happens in order to make sure that vsftpd can handle i Anonymous-FTP account per IP accost. Under inetd/xinetd vsftpd can only handle one Anonymous-FTP business relationship per server even if the server has multiple IP addresses. In gild to avoid this disadvantage compared to the proftpd server the ISPConfig system uses the ispconfig_tcpserver.

vsftp tin exist started/stopped via the following command:

/etc/rc.d/init.d/ispconfig_tcpserver start|stop|restart (RedHat and Mandrake)

/etc/init.d/ispconfig_tcpserver showtime|finish|restart (SuSE and Debian).

If you use proftpd every bit FTP server zero changes.

iii Cron Jobs

The following Cron Jobs are run by the ISPConfig arrangement:

Command	Description	Time
/root/ispconfig/php/php /root/ispconfig/scripts/shell/logs.php &> /dev/null	Analysis of the Apache log files for the ISPConfig traffic statistics	23:59h
/root/ispconfig/php/php /root/ispconfig/scripts/shell/ftp_logs.php &> /dev/null	Analysis of the FTP log files for the ISPConfig traffic statistics	23:59h
/root/ispconfig/php/php /root/ispconfig/scripts/shell/mail_logs.php &> /dev/null	Analysis of the mail service log files for the ISPConfig traffic statistics	23:59h
/root/ispconfig/php/php /root/ispconfig/scripts/shell/cleanup.php &> /dev/null	Deletion of the backups of webs that were deleted from the recycle bin	23:59h
/root/ispconfig/php/php /root/ispconfig/scripts/crush/webalizer.php &> /dev/null	Creation of Webalizer Statistics	04:00h
/root/ispconfig/php/php /root/ispconfig/scripts/beat/check_services.php &> /dev/null	Monitoring (see chapter I-2.4.2)	once every 30 min.

4 Permissions of Folders in a Web created by ISPConfig

In a newly created spider web y'all detect the following folders with the following permissions:

cgi-bin: Here you can save Perl scripts that should be executed by the web server (if "CGI Scripts" is activated for the site).
log: This is the folder where the web server saves its log files for the site.
ssl: If this is an SSL web y'all can notice the necessary SSL files here (e.chiliad. SSL asking, SSL certificate).
user: This is the folder where the abode directories of the users belonging to the site are created. For the user "testuser" you can find the directory "testuser" under "user".
web: This binder is the Document Root for the site, i.e. this is the place to salvage the files/folders that should be accessible via internet.

If in that location is no administrator for the site (see chapter Three-two.2.i), the folders belong to the user the Apache spider web server is running nether by default (here "nobody"); otherwise they belong to the administrator of the site (in this example "web5_admin").

The group of the folders is always the group of the respective site, in this case "web5".

5 Transmission Additions in Configuration Files

Starting from version 1.2.0 of ISPConfig yous tin can write manual additions to the following configuration files (the additions volition not be overwritten past the ISPConfig system):

virtusertable (Sendmail/Postfix)
local-host-names (Sendmail/Postfix)
named.conf (Demark DNS-Server)
Zone-Files (BIND DNS-Server)
Contrary-Zone-Files (Demark DNS-Server)

You will find one of the following two lines in each of these files:

#### Brand MANUAL ENTRIES Below THIS LINE! ####
//// MAKE Transmission ENTRIES BELOW THIS LINE! ////

After this line you can write additional information in these files.

Additions for the virtual host container of a site tin can exist written to the field "Apache Directives (Optional)" in the "Ground" tab of the respective site (see chapter 2-3.i).

Contents Next

aquinochaketherver.blogspot.com

Source: http://ispconfig.org/downloads/manual_en/manual_admin_en_src.htm